I’ve been stuck in the work, recharge, repeat cycle for about a decade now. I’m looking to get back into hobbies and activities to enjoy my free time and possibly meet other folks.
I’ve heard you should have 3 types of hobbies: something to keep you fit, something to keep you creative, and something that can make some money. I’ve considered gym/triathlon (fitness) and woodworking (creative/income).
What are your hobbies? Anything you recommend I try out?
Hobbies are not for making money. That’s what a job is for. Hobbies are where you sink the money you have left from your job and all the other expenses are paid.
That said.
Hobbies for me include:
Hiking (lots of good trails nearby)
Making sounds on my Synth (I’m building a case right now)
TTRPGS (when you can wrangle enough folks)
Skirmish Games (mainly Gaslands)
Video games (slay the spire, and casual WoW)
A lot of people have a hobby that they can either recoup some costs of the hobby, or earn some beer money. Arts and crafts may have the occasional fair or flea market, or even an online store or ko-fi.
In my experience though, once you try to turn a hobby into a primary source of income, that becomes a job and is no longer as fun as it was as a hobby.
IMO as soon as a hobby produces any sort of money, it becomes a side gig. Maybe not a profitable side gig, but a side gig none the less.
Warning - do not make your creative/fun hobby the one that also makes you money. I’ve met several people who were into woodworking as a hobby, started doing it on commission for family, friends, referrals, etc, and it quickly became a job rather than a fun hobby. The timelines and demands that come with doing commissions killed it for them, they still occasionally do woodworking as gifts/favors, but very explicitly just for family and close friends without timelines, and only charge for materials
The funds go in, the fun goes out.
I am strongly considering hanging a shingle as a furniture maker. A few stars have to align first but it’ll probably happen in 2025.
Your warning is valid. I was a project manager for a custom building/rapid prototyping shop before the pandemic, I’m used to customers, deadlines and budgets. Compared to what I’m doing now, I think I’d rather be in command of a workshop again.
I do woodworking as a hobby. It doesn’t make money unless you invest in a full workshop and scale up production to the point where it would basically be a second job. Often the material costs alone are as much as it would cost to buy a completed item.
I’d still recommend it as a creative outlet though. There’s something satisfying about seeing that coffee table in the lounge and thinking “yeah I made that!”
I’m an electronics hobbyist. I have a whole big tacklebox full of components, wires, microcontrollers etc, I’m an amateur radio operator, I build gaming PCs, etc. Kind of difficult to make money with this hobby, but it’s often a good mind exercise and you can be creative building things. I also save myself money by fixing things around the house with my tools.
I’m a woodworker. I built a cutting board this weekend, a walnut/maple brick pattern. Turned out pretty good. Keeping a woodworking hobby from devolving into tool collecting can be a trick.
I’m a guitarist, have been since I was 11. Can be a fairly cheap way to burn some time, get an inexpensive guitar, a few picks, etc. Occasionally get to show off at a bonfire when someone breaks out an acoustic.
I grow a small vegetable garden, and I can some of what I produce. Pizza sauce and jelly mostly. Mint jelly is surprisingly nice to have around the house and it’s not that difficult to make. And mint plants are eternal. The biggest struggle to growing mint is to keep it from escaping containment.
Keeping a woodworking hobby from devolving into tool collecting can be a trick.
This can be true of most hobbies, lol. Amusingly, three others of yours fall into that pattern.
Electronics? If only I had a bigger power supply, higher speed/more channel scope, hot air station, logic analyzer, etc. Guitars? I have friends and coworkers who play. No one only owns one guitar, pedal, amp combo. Gardening? I have quite the setup in my basement to get seeds going, but I live in zone 6 and need to compensate some for the short growing season. Cooking can also be it’s own equipment rabbit hole.
Beyond that: Cameras? Choosing which brand of body to use, sensor size, lens collection, tripods/flash/accessories. If you play a tabletop game do you really play a tabletop game or are you looking for an excuse to make and paint minis? 3D printers can be just as much about messing with the printer as actually printing things.
I think it’s important to recognize the pattern so you can consciously decide if you want to fall into it or avoid it. For some people, the collecting around the hobby is even better than doing the hobby.
With electronics, that is only the tip of the iceburg before you get into trinocular microscopes which the absolute cheapest are almost 300€ nowadays 😉 then assembled PCB prototypes where every iteration can be 200-500€ depending on size. Or you could get into spending hundreds on hotplates and reflow ovens to do it yourself.
But wouldn’t it be faster and cheaper in the long run to be able to fabricate the simple PCBs yourself? There goes 1000€ on a small CNC 😂 rabbit hole goes deeeeep.
I am a filthy hobby hopper and I spend most of my disposable income on these.
- Tinkering with retro game handhelds and sometimes playing them
- Tinkering with bikes and sometimes riding them
- Tinkering with DIY watches and sometimes using them to tell time
- Also bird photography
My theory also is to have 3 hobbies but a different take: One that you can do at home when you have free time, I play guitar. One that gets you out of the house, I fly fish. One that gives you something to look forward to, I used to go on monthly backpacking trips but as I get older they’re turning into fishing trips
PC gaming, being bi sexual, eating hot chip, psychedelics, disc golf
I’m heavily into sport kites. These are controllable kites with 2 or 4 lines. It’s an outdoor activity that can get fairly physical depending on what you are up to. There’s a very small community, mostly focused in coastal areas, but it exists all over the world.
Once you get some basic skills, most people shift toward flying to music as a ballet individually or with a group as a team. If you get good enough, there are travel opportunities where kite festivals pay for all or part of your travel expenses to perform at festivals. I’ve been all over the US and to 11 countries across the world to fly kites in my 18 years in the community.
Past that, there’s also kite making that is a nice extension of the hobby. I build my own sport kites, and build them for others on occasion. There are open source sport kite plans out there, I’ve got a few on my website (https://watty.us), but there are even more at https://kareloh.com.
A good starting place to get into the hobby might be https://sportkite.org, or some Facebook groups like Sport Kite Pilots Lounge.
Electronics projects mostly.
Mostly smart home PCBs and interconnect boards and 3D modelled housings. Examples:
- esp32-C3 dumb doorbell (just a doorbell that sends an MQTT message and sleeps the rest of the time). It works fatastic except that my Proximus ISP modem/router completely fucked up and so the network is no longer usable and I had to set it in bridge mode to a router it can’t reach. I want to release it, but haven’t had the time to water - resistance test it or make assembly instructions
- esp32-S3 voice assistant satellite attached to an IR blaster, I2S mic, and PCM5102 to control and send audio to my old Yamaha RX-496RDS to control it via IR and can play audio (local or Spotify) via music assistant. Pretty much an Alexa echo attached to my speaker system. PCB link which I am planning on releasing.
- My unfinished Flight Stick with custom electronics, fully custom 3D printable housing, etc… It is almost done, but needs like 2 more small iterations, but we moved and started doing a full-strip renovation, so my 3D printer is no longer set up because it is too dusty inside, and I don’t want to spend another $100 doing a PCB test iteration to use a better ADC with less components. Eventually as firmware practice, I want to rewrite the firmware in Rust or something. I also just looked at the Repo and the quick logo I drew up has been modified somehow without any commit. I know for a fact it was correct before. Very weird.
I also have tons of new project ideas that I don’t have time for.
My other hobbies
-
weightlifting, again completely dropped off due to every free moment renovating
-
Running a home server with replacement services for everything I need
-
Running (my motivation has been 0 recently…)
-
cooking. I try to do a few new recipes per month
-
gardening. With the renovation, I just grew a few courgettes, tomatoes, and squash this year
-
video games (more of a de-stresser nowadays than a hobby, most recently casual rocket league with friends is fun, hadn’t played since 2018 or so)
I don’t care about making money with my hobbies, I do them to help me feel better and have some good time. As a whole we’re all already way too focused on making money, at least that’s what I think.
- Long walks. Daily. This is the (second) best change I ever made into my life. I would encourage anyone, even more anyone that is like I was (in a very bad physical and mental shape) to give steady walks a go. Start small but don’t give up even though It’s hard to begin with, and slowly increase the distance you walk and your steadiness. It’s so much worth it. I was a potato couch but nowadays I could not not go out for a few miles walk at least once a day (as much as possible I’ll go everywhere I can by walking instead of using any mean of transportation). It also helps in the head, immensely as far as I’m concerned.
- Writing &
- Reading. Reading and writing should never go without the other as far as I’m concerned. Read (like you write) widely, don’t be afraid to read stuff you don’t normally read, or stuff/author you don’t like (there is a lot to be learned when confronting your own thought to those of people you don’t agree with), or read unpopular stuff.
- Sketching/painting. I’m not an artist, I don’t care I just enjoy doing it. I try to do more of that outdoor, while I’m out walking)
- DIY, making stuff with my hands (book binding, woodworking,… those come and go along the years) & also
- Fixing stuff. Reducing the amount of waste we create by making our stuff last a little longer.
- I had to quit model making, but I liked that a lot.
- Music.
Great advice.
And in the walking vein, good shoes are essential. If you can’t afford new shoes then good insoles are the next best thing and almost as good. Any aftermarket insoles are better than what comes with any shoe (and I mean any, that’s the thing they all cheap out on). You can buy what fits your foot (flat, medium, high arch) and they make walking painless.
And in the walking vein, good shoes are essential. If you can’t afford new shoes then good insoles are the next best thing
100%. And I should have mentioned it as, back when I started to walk daily, I almost gave up because of the shit shoes I was using. They were hurting my feet and my back and they were reducing my endurance, like really. Investing in decent shoes (and orthopaedic insoles made for my feet) changed everything. I probably would never have started walking as much as I do without those. Money very well spend, in both case.
I’m in the researching stage of my next hobbies: pigeon fancying/racing and ham radio. This spring is going to be a wild one at my place!
I hope the ham radio is small so the birds can carry it.
Maybe possible! Coincidently it’s the same article that got me reading about ham again:
Engaging with the fediverse at the moment
Adding to the interesting lists here: As a sport for me I found bouldering and climbing. I don’t like sport but bouldering is not about sport but about getting up that stupid wall, and it feels amazing.
I have multiple hobbies, some require my brain (programming, electronics, engineering and stuff like that) Others not so much (music production/playing live sets, building dioramas, woodworking, metalworking, working on my motorcycle or cooking) And I can highly recommend to get hobbies that both require some concentration and creativity so you can have some balance :) Good luck!
I do:
Yoga
Gardening
Baking (sourdough)
Do occasionally draw or paint too.
I think you have to find something you actually enjoy. If you are good at swimming, triathlon is a great idea but the long distance ones do take a lot of training time.
I don’t try to monetize hobbies anymore, it’s a drag.
3d printing. !3dprinting@lemmy.world
homebrewing !homebrewing@sopuli.xyz
baking !bready@lemmy.world
drooling over big thighs !thiccmoe@ani.social
I was with you up until big thighs. …though I will say I don’t mind them, I wouldn’t call it a hobby.
Toats down with brewing, baking and 3d printing fo sho though.
Haha, yeah. Understandable. It’s more of a joke line, lol.