Yep, EU as usual having reasonable and well-thought out laws, give the US about 5 more years and they’ll make it law here too.

Because there are laws that specify when the brake light has to come on, and it isn’t when the car shows down (slightly).

To be clear, the laws say when it must illuminate. They do not (in the US) prevent illuminating it for other reasons in any way. The law says the light must illuminate/burn if you are actively pressing the brake pedal, but does not prevent it from also illuminating if a certain amount of regenerative braking is applied or a deceleration is detected. Theoretically an automaker could get away with making the brake lights simply always illuminate (and that loophole would be fixed in days, so no one does it).

To be fair, in that specific case it is almost certainly not YouTube directly censoring the phrase. They aren’t known to do any kind of editing like that on uploaded videos.

What is happening is the person that uploaded that video censored themselves…because YouTube’s policy around monetization. They’ll demonetize videos with certain no-no words. Part of that is YouTube and part of that is advertisers demanding their ads not be placed on content that they find objectionable.

Indirectly, YouTube and advertisers are censoring our content. A lot of it is also TikTok, which will ban you for no-no words. This seeps over into YouTube where something that might be fine on YouTube but is banned on TikTok gets censored anyway in case it gets clipped for TikTok.

Genuinely the power TikTok and it’s advertisers have over how we communicate is pretty scary. Imagine how often you hear “unalive” instead of “suicide” these days. “Pdf” (or others) instead of “pedophile.” The list goes on.

Why would Amazon want to hinder the accuracy of the price tracking in that way?

Accurate price tracking leads to people saying “Oh well it was 50% less a year ago. I’ll wait on a sale, not paying full price on that” and waiting on a sale, leading to less conversions. Amazon has pressured Camelcamelcamel into agreeing to not track specific low prices (i.e., Prime Day, if that actually had any good sales). I’m unsure if they track coupons or not, they were not clear about what the criteria for not tracking a price are.

Camelcamelcamel is unfortunately compromised by Amazon, it’s probably mostly accurate but there are price points they do not accurately log at Amazon’s request.

I’m not arguing one way or another but I want to clear up some very common misconceptions about US gun laws.

in some states, you can get semi-automatic weapons (which are completely banned in Austria) in a shop in just minutes. And that without any background checks, psychological reports, justifications, approval required, without anything like that

This is just blatantly untrue and I wish people would stop parroting it. If you go to any shop you need to pass a federal background check to buy any non-vintage firearm (pre-1899…not exactly a ton of those floating around). The exception here is private firearm sales, i.e. I go to Craigslist and sell a rifle or handgun. The law states the seller has to have no reasonable cause to believe they would be an unlawful possessor (weak, yes). With that said, almost half of the states (22 per Wikipedia) have implemented state-level laws requiring a background check for private sales.

In many states even convicted criminals can get guns like that.

Again, objectively untrue. You are not buying a firearm from any legal, licensed dealer in the US without going through a background check. And a violent criminal offense will get you barred from purchasing. For the 28 states without laws around private sales, the seller can be federally legally liable if they sell to someone that is not legally allowed to have a gun and they use it to commit crimes.

In the US, guns are sometimes a presents for kids which they can just…own and use (while in Austria everything is obviously 18+).

No, a child cannot legally own a firearm. The parent can purchase and own a firearm that they are allowed to use, but they do not own it. In many states if the child hurts themselves or others with such a firearm the parents will be held liable, many states have laws around safely storing firearms when children are around.

While in the US (in many states), you can just carry any gun around in public whatsoever. So even if the police sees you having weapons in public, they can’t / don’t do anything about that

In most states if you don’t have a license to conceal carry and you do you are breaking the law and can be charged. I’ll say this one isn’t entirely false but heavily depends on your state.

A large part of why this issue gets nowhere is that neither side can even agree on what is true today, rather than what should be true to bring down the issue of violent crime. If one side says “They’re totally unregulated you can just buy one off Amazon and start blasting. We have to do something!” The other side is gonna think “Well they obviously have no idea what they’re talking about, no point in listening to what they have to say”

I own the Sovol SV06, it was my first printer but it was also the cheapest option for me ($169 IIRC). The Sovol has given me two problems in the entire time I used it:

1. When it came in, the extruder was jammed. Wouldn’t print or extrude any filament for some reason. Followed a 2 minute video on Sovol’s Amazon page to resolve it (although it did involve disassembling the hotend).

2. The extruder decided to encase itself in plastic one day when I printed something on it. That was a bitch and a half to clean, had to take a heat gun to it to soften the plastic then scrape it off without burning myself. My best guess is it was caused by me forgetting to run bed leveling after moving the printer a bit, hasn’t happened again.

Other than those two times it just works every time I need it. It was sitting dormant for ~3 months and I just kicked off a print yesterday, no problems. Fired right up and everything printed perfectly.

With that said, is it €239 of “Just works”? Probably not. I immediately couldn’t do some prints I planned because of the build volume (although all three of your options have the same build volume). So I’m already considering upgrading to an SV06 Plus. So check some of what you want to print that it’ll fit in 220x220x250.

I did some research on your other options and as far as I can tell, the main difference between them and the Sovol is the all metal hotend and print speed.

Sovol SV06 has an all-metal hotend so you can print high temperature filaments (PETG/TPE/CFN/etc) without worry (does require a harder nozzle most likely though). The other two seem to have some metal but are not fully metal, so if you want to hop into the more exotic materials you’ll have to upgrade those.

Second is speed, my SV06 prints at 80 mm/s. It is slow. Smallest prints take around 2-3 hours. My current print will be done after 24 hours. This is fine for me as most of my prints need complex geometry, so I’d rather it take longer and be accurate than run it too fast. The others claim a max speed of 250mm/s which would be a bit over 3x faster than the Sovol. If they can actually print at that speed without looking awful, that’s a pretty big upgrade time-wise.

If you need exotic filaments and don’t want to upgrade the hotend yourself for it then consider the Sovol. Other than that, the price in your region makes it not an option in my opinion. The Sovol just is a budget printer, only makes sense at budget prices. The Kobra and Ended you mentioned look very similar other than that, they both have auto bed leveling (a must have), same build size, very similar designs. Personally I’d lean towards the Ender, just for the community support. But do some research and see how many community member posts you see online resolved with the two. They seem to be functionally identical to me otherwise (just looking at a spec sheet, I do not have irl experience with either of these printers)

Even if it started out that way, where “surge” pricing is current pricing and “off-surge” pricing is cheaper, leading to consumers paying less overall, it won’t stay that way. It would only be that way to prime consumers mentally to accept that dynamic pricing. After which they’ll slowly increase prices, 10 cents or whatever every month. Soon enough it’ll cost more and the corporation can brag about how it increased profits again this quarter. Remember publicly traded companies are legally obligated to maximize profit - the only time they aren’t doing so is when they’re burning money to prime consumers to accept bullshit or building a captive base, in order to eventually maximize profits.

Usually that affects businesses that either provide an online service, so their costs spike massively

It was reported they were spending half a million USD a month on server costs. A lot of the servers are player-hosted but there are also official servers hosted by PocketPair. Half a million won’t immediately crush them with their current sales numbers but it isn’t great either.

Honestly no idea why they even have official servers.

750ti and 1050ti were pretty well liked since they didn’t need external power (easy to toss into a cheap pre built) and were a reasonable price.

These days they aren’t even a reasonable price though.

The not-so-quiet part here is “Homeless or poor people don’t deserve to have their basic need of a toilet met”

They call it a “need” but proudly talk about how they’re taking it away from the less fortunate.

Conveniently I work in this space, but note the following is primarily my own personal opinion.

Primarily there’s a few reasons I prefer Android Auto over native Android on the car:

1. Ever had a phone that’s a few years old slow down in you? Now imagine you buy a car for $60k, and three years down the line the (already sluggish to begin with) Android interface is bogged down by updates and is barely usable. Imagine Spotify drops support for that version of Android Automotive. Android Auto puts all the infotainment into something the customer controls, and something external to the car so you are not dependent upon the OEM to do their own due diligence to ensure functionality and compatibility. If my phone slows down from age/wear/increased software demands, I go buy a new $400 phone. If my car’s infotainment slows down I…buy a new car? (Looking at you GM)

2. Like I said it moves the infotainment to something in the customer’s (and Google/Apple’s) hand. OEMs do not want this. Auto makers want you locked into their proprietary Android skins for two reasons. First, making it more difficult to leave their specific company’s ecosystem. They (will) build in their own apps that you’ll start putting all your settings and private info on. Things like remembering a driver’s preferred seating and mirror arrangement and auto-adjusting, so when your spouse buys a car you go “Oh well if we both have brand X, it’ll be easier to drive each other’s cars.” Etc. Second, they want all of your data. Legitimately the industry is on fire right now figuring out how much consumer data we can scrape and use/sell with these systems. The Android Automotive stack in a car is 300% sending data back to the OEM of literally anything they are legally allowed to collect. Probably more, too. Plug in Android Auto from my phone and yeah they’re still spying on me, but they don’t have my Spotify login info or my specific apps used, they just have what the vehicle can directly measure (still a terrifying amount).

In your specific case with a third party head unit…go ham and use the stock interface if you want. Personally I’d still use Android Auto, to top off my phone and to access my local music library (I don’t stream music), but a third party has a lot less interest in spying on you or locking you in the same way an OEM does.

Also out of curiosity, what head unit did you get? I’ve got a 2012 Cruze I’ve considered installing one of those on but I can almost never find anything that seems actually trustworthy.