• 0 Posts
  • 79 Comments
Joined 1 year ago
cake
Cake day: April 23rd, 2023

help-circle

  • Router-level VPN is going to be more difficult to configure and cause more problems than just having it on all your devices. There are some games where online play just refuses to work if connecting through a VPN. Some mobile apps are the same. When a website blocks your currently selected server, and the usual solution is switching to another server, that’s going to be more difficult and more tedious when it’s configured at the router level. In addition, if you do something like using a self-hosted VPN in order to connect remotely to a media server on your home network, that becomes more difficult if your home router is on a different VPN.

    If you’re trying to keep local devices in the building from phoning home and being tracked, a PiHole or router-level firewall might be a better solution. I think if you’re running a pfsense or opnsense router and are a dab hand with VLANs then maybe you could get what you’re looking for with router-level VPN, but it’s a huge hassle otherwise. Just put Mullvad on your computers and phones and call it a day.


  • Unfortunately I can’t even test Llama 3.1 in Alpaca because it refuses to download, showing some error message with the important bits cut off.

    That said, the Alpaca download interface seems much more robust, allowing me to select a model and then select any version of it for download, not just apparently picking whatever version it thinks I should use. That’s an improvement for sure. On GPT4All I basically have to download the model manually if I want one that’s not the default, and when I do that there’s a decent chance it doesn’t run on GPU.

    However, GPT4All allows me to plainly see how I can edit the system prompt and many other parameters the model is run with, and even configure multiple sets of parameters for the same model. That allows me to effectively pre-configure a model in much more creative ways, such as programming it to be a specific character with a specific background and mindset. I can get the Mistral model from earlier to act like anything from a very curt and emotionally neutral virtual intelligence named Jarvis to a grumpy fantasy monster whose behavior is transcribed by a narrator. GPT4All can even present an API endpoint to localhost for other programs to use.

    Alpaca seems to have some degree of model customization, but I can’t tell how well it compares, probably because I’m not familiar with using ollama and I don’t feel like tinkering with it since it doesn’t want to use my GPU. The one thing I can see that’s better in it is the use of multiple models at the same time; right now GPT4All will unload one model before it loads another.


  • I have a fairly substantial 16gb AMD GPU, and when I load in Llama 3.1 8B Instruct 128k (Q4_0), it gives me about 12 tokens per second. That’s reasonably fast enough for me, but only 50% faster than CPU (which I test by loading mlabonne’s abliterated Q4_K_M version, which runs on CPU in GPT4All, though I have no idea if that’s actually meant to be comparable in performance).

    Then I load in Nous Hermes 2 Mistral 7B DPO (also Q4_0) and it blazes through at 50+ tokens per second. So I don’t really know what’s going on there. Seems like performance varies a lot from model to model, but I don’t know enough to speculate why. I can’t even try Gemma2 models, GPT4All just crashes with them. I should probably test Alpaca to see if these perform any different there…



  • PCIe gen 5 is for the PCIe slots and NVMe storage slots, but they’re backwards compatible; you can put a gen 3 component in a gen 5 slot and it will work at gen 3 speeds. Similarly, if you put a gen 5 component in a gen 4 slot, it will be limited to gen 4 speeds. Right now there’s very little appreciable difference between gen 4 and gen 5 unless you’re spending a lot of money on the component (GPU/storage). Another thing to note is that Gen 5 requires that both the CPU and motherboard support it; a CPU with gen 4 support in a gen 5 motherboard will limit all the slots to gen 4 speeds.

    RAM is a totally different standard that must be matched exactly for what the motherboard has; if it’s a DDR5 motherboard then you have to use DDR5 RAM or it won’t even fit in the slots. You can get a PCIe gen 5 motherboard and just use gen 4 SSDs or GPUs, that’s perfectly fine and leaves you room to upgrade later.


  • Seems mostly fine to me, I game all the time on Linux (Bazzite gang 🤘) with a 3900X + 7900GRE, haven’t had any significant issues aside from needing to make sure clock speeds were configured correctly on the GPU. Two ram sticks is the way to go with these systems as sometimes they don’t support 4 sticks at full speed.

    You’re right that GPU passthrough is definitely more for tinkering or advanced users with very specific needs (usually professionals who need Windows/Nvidia and choose to run it in a VM rather than dual-boot), with a budget to match. For a gamer couple, having fully separate systems is going to be much less hassle and more resilient against failure.

    The one thing I would recommend changing is the power supply, it’s unironically the most important component in the computer because if it fails it can kill everything else, and the System Power 10 is known enough for being low-quality that discussions of that come up in web searches. Poor quality power supplies can damage your hardware and otherwise cause weird, intermittent issues even if everything seems to work fine most of the time, and will fail and shut off the computer when a good power supply would have just kept on chugging. Seasonic and Corsair are considered the best brands and have 10 year warranties - they’re more expensive, but they’re worth it. You want 80+ Gold or better these days, this is a buy once, cry once component.

    If you don’t have a UPS, I would also recommend getting one at some point, either one big shared unit (if they’ll be close together) or two individual units. Having backup power will allow you to shut down the computers gracefully during a power outage, and prevents the worst-case scenario where the power goes out while the computer is installing updates and it turns into a brick.








  • He did at the beginning, but he helped them get what they wanted in the end, and I think that counts for something.

    “We’re thankful that the Biden administration played the long game on sick days and stuck with us for months after Congress imposed our updated national agreement,” Russo said. “Without making a big show of it, Joe Biden and members of his administration in the Transportation and Labor departments have been working continuously to get guaranteed paid sick days for all railroad workers.

    “We know that many of our members weren’t happy with our original agreement,” Russo said, “but through it all, we had faith that our friends in the White House and Congress would keep up the pressure on our railroad employers to get us the sick day benefits we deserve. Until we negotiated these new individual agreements with these carriers, an IBEW member who called out sick was not compensated.”



  • Onihikage@beehaw.orgtoGaming@beehaw.org98% compatibility
    link
    fedilink
    English
    arrow-up
    2
    ·
    2 months ago

    You don’t need to add the exe of whatever mod tool to Steam, use Steam Tinker Launch. It lets you add an exe to run instead of the game, concurrent with the game, or injected after the game is up, and it will run in the same prefix that Proton uses for that game. It also has tools for installing and using several mod managers, and generally a ton of good features for tinkering with the game.

    The main issue I haven’t solved is getting something like the Nexus mods “open in manager” to work. My guess is I might have to install, run, and configure a web browser inside the prefix, but that sounds really annoying so I haven’t tried it.




  • The ELI5 for Fedora’s atomic desktops is that if Windows had an Atomic Desktop version, Program Files and most of the Windows folder would be read only, and each program you installed yourself would go into its own folder in your user directory. That’s the basic idea. It’s harder to screw up an Atomic system as long as you stick to containerized app formats like flatpak/appimage whenever possible. It makes it easier for everyone to diagnose problems, and easier for users to roll back if an update has problems. Even if you were to install it right now, you could use one simple command to “roll back” to any image from the last three months.

    The benefit of Bazzite is you have all of the above, plus a lot of gaming-related stuff preinstalled which, if you were to install them yourself in a normal Fedora environment, you’d likely have to spend a lot of time just learning how they’re supposed to be configured, how they interact, which versions have problems, and how to troubleshoot problems when an update to one app breaks a prerequisite for something else; eventually you end up in config hell instead of actually using your computer. With Bazzite, the image maintainers are the ones in config hell - they work out the kinks, app versioning, communicate with upstream to fix issues, all that, so your system should be in the most functional state that a Linux system can be, so you only have to think about using your apps.

    tl;dr

    • Atomic Desktops are more resilient to randomly breaking from updates or user error, and are easier to revert to a prior state if problems do arise
    • Bazzite is a custom Atomic image with lots of gaming stuff preinstalled and preconfigured to work properly out of the box
    • If you’re a gamer and wanting to try out Linux, Bazzite is going to be the least painful way to get your feet wet.
    • Immutable distros are excellent for daily driving. I daily drive one myself!