The Free Press. (They are a monthly subscription) Journalists who left the New York Times. I find most of their articles to be refreshing and insightful. They seem to be truly middle-left for American politics. They don’t try and feed on outrage to gain clicks. You’ll find less low hanging fruit like Trump rage-bait, and provide more thoughtful, unbiased reporting like NPR used to back in the day. I learned about them from an article where a right-leaning NPR editor did an interview with them about lack of balance at NPR and was subsequently fired for his views. As someone who’s listened to NPR for decades It really hit home as I listened to it happen over the years in real time. I value balance over the unchecked shift to one side or the other. I really enjoy the Friday editorial newsletter, TGIF. The humor is a good way to wrap up the week.

If I have one complaint it’s that the stories skew Israel/Jewish heavy, but given that the founder is Jewish. I understand why and can forgive it. They have plenty of good talent working other stories so there is always a good read.

She has not gone out of her way to criticize Trump, and has instead treated both Trump and Harris as being equally bad…

I’m sold.

But people in the original Lenny thread told me it was the Klan! The op, “Buttflapper” reports: “They were filming and had fake county employee badges, immediately trespassed and removed”. Surely they didn’t jump to conclusions and were wrong!

… I’m pretty sure their pixel art was “heavily inspired” by Castlevania from the start. The last time I played it I noticed it started shifting away from that.

What is the actual quality of the game?

Did you know about this game? Did you buy and play this game? Did you actually like this game?

Are you one of the ~220 people who bought this game and didn’t spread the word to their friends.

It sounds to me like this game sucks. Maybe it was rotten from the start. Maybe they were forced to hire a bunch of mentally ill people with a massive chip on their shoulder to ‘advise’ and change the game to tick some boxes on a list. ( don’t you just love having fun according to a list of prescribed requirements? ) I bet the people working on it like that. Talk about a soul sucking job without passion. We will probably never know the truth.

5x 5 gallon jugs of water. A few weeks worth of canned goods. A stack of fire wood. Solar panels and a few batteries to charge small devices like radios. A couple of GMRS radios and a couple of HAM radios. Propane tanks and propane heaters.

Harry and Dudley bond over Monty Python?

More radio spectrum. Voice and data capability. Licensed HAM nerd shit. Meshtastic is relatively a narrow unlicensed spectrum with bandwidth limitations. It’s about tinkering just like Meshtastic is but with a license.

I experienced Timeshift with LMDE about 2 or 3 years ago. (Linux Mint Debian Edition) when I heard about it I immediately re-installed using BTRFS to try it out. I gotta say snapshot backups are very fast. It really surprised me. I tried out some config changes and restores and it went very smoothly. If you can leverage Timeshift in grub then I need to watch the video and set that up asap. Nothing more annoying than trying to diagnose a failed boot or giving up and reverting to a previous kernel. (Spoiler: It’s always nvidia kernel modules)

Windows 11 has taken a feature from Linux distros called “Task View” where you can create additional “desktops”. You could do something similar with that and forego the additional laptop/desktops.

This might be a little unorthodox, but this is an option to reduce hardware costs and maximize desktops.

• 1x PC
• 4x Monitors (or more if you want to buy another video card)
• 1x server to be used as a Proxmox Virtualization Environment server to host as many desktop OS’s as you want.

you can split your four-monitor workstations’ screen real estate any way you like. keep using the same mouse and keyboard and just tab through the virtual workstations that you need to work on.

Proxmox is free for personal use. You can run it on a dedicated desktop workstation connected to your network. you are limited to the resources in your hardware. RAM, CPU, Storage. you’ll be slicing that up between the number of Virtual Machines that you create, so think about what you will be wanting. For example, if your specs are one desktop with 8G of ram and 128G of disk space. multiply that time the number of workstations you want, add the basic requirements of Proxmox as a server, and you have a good idea of what you are going to need.

If you want tons of resources you could buy a decommissioned server off of ebay. something akin to a Dell R720 or better. They can be upgraded to quite a bit of RAM and storage space. I think mine has something like 2 physical CPU’s @ 32 cores, 256G of RAM, and 3.2T of disk space (RAID10). I paid around $500 for mine a few years ago. and a few dollars more to max out the RAM, and a few dollars more to add some sold state drives in the drive bays. The entire system came in under the cost of a mid-range gaming pc. or a little under the price of one NVIDIA GeForce RTX 4080.

I haven’t owned a phone with removable storage since the Samsung Galaxy S5 back in 2015. (I miss that phone) Since then I’ve gone from iPhone, to Pixel, to Pixel, to iPhone, to iPhone. None of which had/have removable storage. Personally I don’t require much storage. The largest consumer of storage on my current phone is “Messages” at like 10G. I’m pretty sure the Photos app offloads photos to iCloud regularly so It says only 1G of storage.

The best upgrade I made for the Ender 3 for adhesion was a PEI coated build plate. I don’t know the specs of the V2, but the brand I went with was “Wham Bam Systems” mine didn’t have a magnetic bed so I had to purchase the kit with the magnetic plate, and stainless steel PEI coated build surface. It was nice being able to pull off the plate and pop prints off of it. Be careful printing PETG on PEI it can fuse to the PEI

If the V2 has some sort of leveling system make sure it’s working correctly or the PEI sheet isn’t really going to help. Mine did not. I had so many failures where the print head crashed into the sheet and gouged it. The Z end stop wasn’t the best. I added a BLTouch probe and flashed the firmware and it got much better.

Creality is good because they brought an entry level 3d printer to market for an affordable price, and people like me got into the hobby because of that. The price point shows in the parts they use to assemble it. I’ve clocked countless hours learning how to correct failures, and upgrade the cheap parts for better, more reliable parts, add features, modify and flash firmware.

Five and a half years ago I bought that ender 3 pro. I think it was around $250 USD. I probably spent over $300 more upgrading it and replacing parts. In retrospect I shouldn’t have cheaped out, but that’s the conclusion I came to. I no longer want to waste time fixing the printer. If I walk away and don’t print anything for weeks/months at a time I’d like to have confidence when I fire it up it’s going to work.

I ordered a Prusa MK4S about a month ago which was the top-end hobbyist printer back then, and I am blown away by the difference. Prusa may not be the top at the moment, but the quality and support is there.

I recommend that unless you have the free time, you’re willing to tinker, and are not easily frustrated, you should look into a higher quality brand.

I’ve never watched any of his videos, but I’ve seen clips. I just can’t do it with the amount of cringe inducing content. The channel shows his last upload was 7 months ago. That’s one hell of a transformation. My first thought is “is this real or some sort of AI filter?” My second thought was what kind of damage did he do to himself in the process of this transformation? Was it “natural” via diet and exercise, or surgery? 7 months and 250 pounds lost (if that can be believed) seems very, very extreme. I don’t even know if with some money and a paid physical trainer with questionable ethics it could be possible. The amount of excess skin would be another thing to consider. He got me to click and watch a couple of minutes so maybe he won the game, but at what cost?

Friday 1995

I’ve got a few of their bundles we’ve played multiple times. Quiz night style games are awesome for a while, but we like to play a more action(?) style of games where you control your character and work together or go off on your own to progress the group.

I thought last train outta worm town was awesome.

Couch co-op is rare these days, but I would like to see more co-op in general. I used to have game nights on Friday night with friends on discord, but we just ran out of good games to play. Limiting factor being how many people can play at the same time. Most of the co-op games we have right now seem to be designed to make you miserable. You’re gonna fail, but how long can you last? I just want to have some fun with 2-6 friends without getting discouraged. One of the best ones we played was “Golf With Your Friends”. I don’t even like golf, but we all could play, no one had to sit out, and we had a blast until it got boring.

Yep. In the style of Trump

This cabinet is truly spectacular—one of the finest you’ll ever see. It’s got so many shelves, folks, you wouldn’t believe it. Absolutely tremendous. Each shelf is perfectly designed to showcase your prized possessions. Believe me, the craftsmanship is second to none. These shelves are not just shelves; they’re a statement. They’re big, they’re beautiful, and they hold everything perfectly. This cabinet is going to be a tremendous addition to any room—nobody does shelves like this, folks. It’s going to be huge!

Woah there. You’re using about 25% more of your brain than the rest of the internet. We’re gonna need you to tone that reasonability down a bit.

I look forward to setting up my next polyamorous network connection. I can wait for the commands nmcli con choke me daddy ens1 thrupple0