I mean you can say the same for spinning magnetic platters. “The more bits you’re trying to squeeze into a fixed size HDD the less robust it is.”
I’m not saying these guys can do it, but dismissing higher densities of storage out of hand seems a bit glib considering the last 60 years of progress and innovation.
That’s never really been an issue with HDDs as far as I’m aware, although 10k rpm drives were known to be more fragile IIRC. The lower life and robustness of QLC vs SLC flash is well known.
Decades ago, a collegue of mine (who once worked in hard drive design) said, “Oh, hard drives stopped reading 1’s and 0’s years ago. Now they compute the probability that the data just read was a 1 or a 0.”
The Seagate Exos in my aray consume 8-9W each on idle, and 12-13W active. I doubt that a NVME would consume that much in idle, which will be most of the time for data storage.
AFAIK power consumption increases with size on SSDs. And that’s not the case with spinning disks. That’s what I tried to point out, from the perspective of hoarding data (idle disks) bigger sizes are not something to be pursued. Then of course there’s the use case of needing a high volume fast storage (e.g. zfs cache), for which use case these are great!
Google says hdd idle is higher than SSD. Ssd is higher under load but it’s important to look at total energy used. If the SSD spikes high, but is 10x faster, the total energy used will be less.
Generally the more layers you add to an SSD the less robust it is. If this is real your data will be corrupt within a week.
I mean you can say the same for spinning magnetic platters. “The more bits you’re trying to squeeze into a fixed size HDD the less robust it is.”
I’m not saying these guys can do it, but dismissing higher densities of storage out of hand seems a bit glib considering the last 60 years of progress and innovation.
They’re a flat-storager.
Should work perfectly with Flatpack apps then!
That’s never really been an issue with HDDs as far as I’m aware, although 10k rpm drives were known to be more fragile IIRC. The lower life and robustness of QLC vs SLC flash is well known.
Because drives use ECC and spare sectors to give the illusion of reliability just like QLC.
Here is reliability vs drive size.
Decades ago, a collegue of mine (who once worked in hard drive design) said, “Oh, hard drives stopped reading 1’s and 0’s years ago. Now they compute the probability that the data just read was a 1 or a 0.”
That is exactly what ppl like you said when SLC came out and TLC came out and QLC came out…
Look back now.
And they use far more energy. Meanwhile spinning disks can sit idle with all of my hoarded data.
The Seagate Exos in my aray consume 8-9W each on idle, and 12-13W active. I doubt that a NVME would consume that much in idle, which will be most of the time for data storage.
AFAIK power consumption increases with size on SSDs. And that’s not the case with spinning disks. That’s what I tried to point out, from the perspective of hoarding data (idle disks) bigger sizes are not something to be pursued. Then of course there’s the use case of needing a high volume fast storage (e.g. zfs cache), for which use case these are great!
Google says hdd idle is higher than SSD. Ssd is higher under load but it’s important to look at total energy used. If the SSD spikes high, but is 10x faster, the total energy used will be less.