I am not a design draftsman, I’m not an engineer. My workflow is usually: I put something on the scanner, load the calibrated scan, trace the outline, throw a few sketches on various planes in there, round a few edges, print it and I’m done.
Fusion 360 scratches that itch very well but requires me to keep a Windows VM and also their free model felt more and more unusable. OnShape is a nice substitute that works fine for me, but I don’t like the “free or 1500€/year” approach. Without a middle ground subscription for makers it feels that I could lose anything the second their energy prices for servers go up or something.
The list of CAD software is exhaustive, so I am looking for recommendations that fit my “eh, click, click, click, good enough” workflow. FreeCAD is way too unintiuitive for that. I have tried getting into it, but 3D printing is a tool for me and the learning curve quickly made using it another hobby.
So. Suggestions welcome. Scalding criticism about my lack of enthusiasm and consumer mentality not so much, but I guess that comes bundled with useful advice, so, eh, I’ll take it.
It looks like Fusion 360 runs fine on Linux these days, I don’t know how reliable that is in practice (I would expect not very much).
OnShape is a great option if the licensing terms are compatible with what you are doing. They used to have similar licensing terms as Fusion 360 where you could still get paid for your work with a free version (i.e. YouTube) but changed the terms to remove this loophole. Fusion still allows this with the Startup license but of course could change their mind at any time, then you’d be out of luck.
I dislike the lockdown of Fusion 360 but its mental model works with my own (I can’t “get” SolidWorks and never remember how to do anything). Speaking of SolidWorks, they added a reasonably-priced license for DIY/hobbyists, but it’s the same lockdown as Fusion 360 and still Windows only.
I’m in the same boat as you, just a hobbyist doing this for my own use, I have no interest in becoming an industrial engineer. For now I will keep using Fusion 360, and when that stops being an option I’ll move on to something else. I can whip out models for my prints easily enough and the 10 documents limit is just an annoyance, not a real limitation.
At the very least whatever you design in Fusion 360 or OnShape won’t be stuck in there, you can export it out via .step files. You lose design history (if applicable) but not the model itself.
I can assure you, it does not.
Do not switch to Linux and expect this project to save you, it is NOT beginner friendly.
It’s great, and I’m sure someone smarter than me could probably get it working, but personally, I failed miserably and switched to OnShape.
Yup. At this point, “locally installed, reliable, parametric modeling on Linux” = “FreeCAD, including Ondsel, and SolveSpace”. That’s it. Well, there’s code-to-CAD as well, which obviously retains parametric history, but goes about it very differently than a design tree.
For non-parametric modeling, BricsCAD and Plasticity enter the discussion. For parametric on the web, OnShape works very well but I hate their licensing scheme and the huge doughnut hole in their pricing model.
I was quite amazed reading NopHead’s blog a while back because he uses OpenSCAD exclusively, even managing to design an entire printer and its upgrades in there. I didn’t think any sane person could do this.
I should have prefaced that I did not actually run this myself, but I did take a note of it, it looked promising. Sorry for the false hope!
I would expect it to work after a lot of fussing about, and then break at the slightest update. Easier to run it in a VM (which is also not easy in order to get GPU acceleration without dedicating a card to it - I never managed to get Intel GVT-g nor GVT-d to work reliably).
I went the Solid works hobbyist route, quite frankly, it’s well worth it. I tried freecad for awhile but it just didn’t compare.
I could never get his repo to work, I’ve resigned to using fusion in a VM for now while I wait for progress in freecad or the parametric cad plugins for blender to mature.
I recently tried the flatpak this repo has linked and couldn’t get it to work properly. First I had to google for a login workaround because the bottle couldn’t open the browser login link and when I finally got it to “work” the rendering was broken.